top of page
R113.jpg

R113 – 13 SPINDLE MANUAL SINGLE ROW LINE BORING DRILL

Standard Features

  • (1) 13-Vertical Gear Driven Spindles on 32mm Centers

  • 60″ Back Fence With (4) Stops

  • 10mm Bored Collets with set screws

  • (7) Right Hand, (6) Left Hand

  • (2) Spring Loaded Index Pins

  • Adjustable boring depth

  • Manually Actuated Boring Cycle

  • Spring Return Up Stroke

  • Spring Operated Hold Downs

  • Manual Motor Control

  • Tooling Not Included

Technical Data and Specifications

  • Spindle Drive Motor: 0.75 HP

  • Throat Depth: 8″

  • Work Surface: 20″ x 48″

  • Footprint: 30″ x 60″

  • Electrical: 120V, 1 Phase, 60 Hz

  • Air: N/A

  • Shipping Dimensions: 42″ X 64″ X 76″

  • Shipping Weight: 508 LBS

 

The starting point for our line boring machines, this unit is both affordable and built to last. No more using templates that wear out quickly and lose accuracy. This machine is easily adjustable for entry and exit points, and cleanly allows the user to repeat the drill hole pattern with centering pins on both the left and right hand side of the machine. The rear fence is adjustable for offset from the edge as well. If you’re looking for your first line bore drill, look no further. This machine will give you many years of service with little to no maintenance. This is a clear choice among professionals.​

R19F.jpg

R19F3 – 23 SPINDLE

SINGLE ROW LINE DRILL

  • 23-Spindle Drill Head

  • Gear Driven Spindles on 32mm Centers

  • Index Pins

  • 3 HP Spindle Drive Motor, TEFC

  • 10mm Bored Collets

  • (12) Right Hand, (11) Left Hand

  • 12″ Throat Depth

  • 60″ Back Fence With (4) Stops

  • 24″ X 48″ Work Table Surface

  • (2) Spring Operated Hold Downs

  • Wired 3-Phase 240/480 Volt, 60 Hz.

  • Pneumatic Driven Boring Cycle

  • Tooling Not Included

  • Crated Dimensions: 45″ X 80″ X 78″ H and 740 Lbs

 

Options

  • R19F1 – Single Phase Machine

​

 

An upgrade to the R113, this unit is foot pedal operated. No more using templates that wear out quickly and lose accuracy. This machine is easily adjustable for entry and exit points, and cleanly allows the user to repeat the drill hole pattern with centering pins on both the left and right hand side of the machine. The rear fence is adjustable for offset from the edge as well. If you’re looking for your first line bore drill, look no further. This machine will give you many years of service with little to no maintenance. This is a clear choice among professionals.

R46.jpg

R46 – 46 SPINDLE

DOUBLE ROW SYSTEM DRILL

  • (2) 3 HP Spindle Drive Motors, TEFC

  • (2) 23-Vertical Gear Driven Spindle Rows

  • 32mm Spindle Centers

  • 10mm Bored Collets

  • (24) Right Hand, (22) Left Hand

  • 4″-24″ Centers Between Rows

  • Digital Readout Front Head Position Display

  • Precision Linear Head Ways

  • (3) Quick Set Drill Head Position Stops

  • Rear Drill Row Nesting

  • 48″ Back Fence with (2) Stops

  • (2) Air Index Pins

  • (2) Position Drill Depth Stop Turret

  • 30″ X 48″ Work Table Surface

  • Wired 3-Phase 240/480 Volt, 60 Hz.

  • Foot Actuated Boring Cycle

  • Tooling Not Included

  • Crated Dimensions: 54″ X 54″ X 76″ and 1,341 Lbs

  • Designed and Manufactured in the USA

​

Additional options for this machine include:

  • H259 – Digital Rear Head Location Display

  • H906 –  Quick Change Drill Chucks

  • U4662 – Additional Fence Stops

  • U4680 – Air/Oil Table Feed

R76.jpg

R76 – 76 SPINDLE CNC DRILLING SYSTEM

  • (3) 3 HP Spindle Drive Motors, TEFC

  • (1) 76-Vertical Gear Driven Spindles

  • 32mm Spindle Centers

  • 10mm Bored Collets

  • (38) Right Hand, (38) Left Hand

  • 0″-24″ Programmable Throat Capacity

  • Triple Precision Drill Row Guide Rails

  • Magnetic Scale Precision Drill Row Positioning

  • Programmable Through Boring, Servo Driven

  • Twin Ball Screw Boring Stroke Control

  • 30″ x 108″ Table Area

  • Right and Left Hand Work Stations

  • (4) Pneumatic Material Clamps

  • Touch Screen CNC Controller

  • (2) Emergency Stop Buttons

  • 75-Spindle Gear Driven Drill Head

  • 10mm Bored Collets on 32mm Spindle Centers

  • 2,368mm (93.228″) First to Last Spindle

  • Twin Ball Screw Drill Row Positioning

  • Programmable Boring Depth, Servo Driven

  • Triple Precision Table Guide Rails

  • Magnetic Scale Precision Table Stroke Control

  • 1-1/4″ Maximum Material Thickness

  • 108″ Back Fence with (4) Positioning stops

  • (4) Spring Operated Material Clamps

  • Center Beam Mounted Cycle Start Button

  • Tooling Not Included

  • 54″ x 136″ Floor Area

  • 30″ X 108″ Work Table Surface

  • Wired 3-Phase 240/480 Volt, 60 Hz

  • Machine Weight: 4,432 lbs.

R152.jpg

R152 – 152 SPINDLE DOUBLE ROW

SYSTEM DRILL

  • (2) 76- Spindle Gear Driven Heads

  • (6) 3 HP Spindle Drive Motors, TEFC

  • 32mm Spindle Centers

  • 10mm Bored Collets

  • (39) Right Hand, (36) Left Hand

  • CNC Table Feed Control

  • Electronic Drill Head Squaring

  • Foot Actuated Boring Cycle

  • Magnetic Controls

  • Electrical 3-Phase 220 Volt, 60 Hz

  • Tooling Not Included

  • 54″ x 136″ Floor Area

  • 30″ X 108″ Work Surface

  • Designed and Manufactured in the USA

bottom of page